Home>Products>Slewing Drive Gearbox>3 Inch Single Worm Slew Drive Solar Tracker
3 Inch Single Worm Slew Drive Solar Tracker MODELS
Need a CAD or 3D Model?
3 Inch Single Worm Slew Drive Solar Tracker
category
Slewing Drive Gearbox
3 Inch Single Worm Slew Drive Solar Tracker SPECIFICATIONS
3
- Negotiation
- Negotiation
- Distributor of Slewing Bearings and Supports2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
3 Inch Single Worm Slew Drive Solar Tracker Products and services
- Round
- Double Concentric Co
- 4.0000 in
- ANSI/ABMA STD 9
- Powder Coated
- Spherical Roller
- Four-Bolt Base
- 5000
- 8.1250 in
- 1400 RPM
3 3 Inch Single Worm Slew Drive Solar Tracker Systems
3 Inch Single Worm Slew Drive Solar Tracker Size Chart (mm/inches) | |
---|---|
Bearing number | PCZ 4832 E |
Size (mm) | 76.2x80.963x50.8 |
Bore Diameter (mm) | 76,2 |
Outer Diameter (mm) | 80,963 |
Width (mm) | 50,8 |
d | 76,2 mm |
D | 80,963 mm |
B | 50,8 mm |
c1 min | 0,2 mm |
c2 min | 1,2 mm |
M | – mm |
Weight | 0,225 Kg |
Basic dynamic load rating (C) | 305 kN |
c1 min. | 0.2 mm |
c1 max. | 1 mm |
c2 min. | 1.2 mm |
c2 max. | 2.4 mm |
α ±8 | 20 ° |
Shaft diameter range min. | 76.154 mm |
Shaft diameter range max. | 76.2 mm |
Housing bore range min. | 80.919 mm |
Housing bore range max. | 80.955 mm |
Basic dynamic load rating - radial direction C | 305 kN |
Basic static load rating - radial direction C0 | 950 kN |
Specific dynamic load factor K | 80 N/mm² |
Specific static load factor K0 | 250 N/mm² |
Factor depending on material and bearing type KM | 480 |
Permissible sliding velocity v min. | 0 m/s |
Permissible sliding velocity v max. | 2 m/s |
Coefficient of friction µ min. | 0.03 |
Coefficient of friction µ max. | 0.25 |
Mass bushing | 0.23 kg |
Contact Us
- Distributor of Slewing Bearings and Supports
- AddressHigh-Tech Development Zone Tongshan Xuzhou
- Phone(Working Time)0516-85854368,0516-85854767
- Fax